Catalogue → Elegant series
Vera Nova quartz
Sea-green ground crossed by fine gold-brown veins. A statement surface for islands and vanities.
Specification
| Rate | ₹1030 per sq ft MSP, material only |
|---|---|
| Series | Elegant |
| Finish | Polished |
| Thickness | 2 cm |
| Slab size | Jumbo · 321 × 163 cm 56.32 sq ft per slab |
| Cost of one full slab | ₹58,010 material only |
| Brand | Paradigm |
| Stock | On the racks in Maduravoyal, Chennai |
What it costs to fit
The ₹1030 rate covers the stone only. A jumbo slab is 163 cm wide, and a platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 41 cm strip to spare. A two-run kitchen fits one slab; add an island and you are into a second.
Fabrication and installation is ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Sink and hob cutouts are charged separately. A pencil-nosed edge is included; bull nosing is ₹150 per running foot and a mitred joint, which makes the edge look like a thicker slab, is ₹300 per running foot.
See the full rate card for every series →
Living with Vera Nova
Quartz is non-porous, so Vera Nova does not need sealing and resists the tea, coffee, oil and turmeric stains a Chennai kitchen sees daily. Wipe it with a soft cloth and mild dishwashing liquid. Use a trivet for hot vessels straight off the flame, and a board for chopping — the surface is scratch-resistant, not scratch-proof.
Common questions
What does Vera Nova quartz cost in Chennai?
Vera Nova is ₹1030 per square foot for the stone, material only. One full jumbo slab is 321 × 163 cm — 56.32 sq ft — which works out to ₹58,010. Fabrication and installation is a separate ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Cutouts for a sink or hob are charged on top.
How many slabs of Vera Nova will my kitchen need?
A jumbo slab is 163 cm wide. A platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 41 cm strip to spare. A straightforward two-run kitchen usually fits in a single slab; adding an island or a tall backsplash generally pushes the job into a second slab even when the raw area looks like it would fit.
Can the veining in Vera Nova be matched across a joint?
Yes. Because Vera Nova is engineered rather than quarried, the pattern repeats predictably, so two pieces cut from the same or a matching slab can be aligned at a joint and the veining carried through. Tell us at measurement where the joints will fall and we cut to suit. This is the main advantage Vera Nova has over natural stone on a kitchen that needs more than one slab.
How do I look after Vera Nova?
Vera Nova is non-porous, so it never needs sealing and resists the tea, coffee, oil and turmeric a Chennai kitchen sees daily. Clean it with a soft cloth and mild dishwashing liquid, use a board for chopping, and use a trivet for vessels straight off the flame.
Can I see a full Vera Nova slab before ordering?
Yes. Vera Nova is on the racks at our Maduravoyal yard in full slab size, not in a sample book, so you can see the whole pattern in daylight before committing. We also deliver free samples anywhere in Chennai if you want to hold it against your cabinet and floor finishes first.
See the full slab before you decide
Photographs flatten veining. Vera Nova is on our racks in Maduravoyal — walk in and see the whole slab in daylight, or get a free sample delivered anywhere in Chennai.